Нишков електрод / Дротовий електрод / Wire Electrode = ø 30 µm (мікрон/micron)
- Workpiece material: COPPER
- Workpiece size = 10 x 10 mm
- Contour length = 226 mm
- Pin dimensions 50 x 50 µm (0.05 x 0.05 mm)
- Pin height = 500 µm (0,5 mm)
- Wire Electrode ∅ = 30 µm (0,03 mm) tungsten wire Nippon Tungsten vWW1ES
Нишков електрод / Дротовий електрод / Wire Electrode = ø 30 µm (мікрон/micron)
Sodick AP250L EDM
Нишков електрод / Дротовий електрод / Wire Electrode = ø100 µm (мікрон/micron)
- Material: IMPAX
- Total thickness of all layers = 5 mm
- Main contour length = 37 mm
- 7 cuts
- Main contour machining time = 1 hr 56 min
- Wire Electrode ∅ = 0,1 mm
- Workpiece: 1.4112 Stainless Steel 58HRC
- Through tapered hole machining
- Hole upper ∅ = 0.65 mm
- Hole lower ∅ = 0.60 mm
- Cutting length ≈ 2.04 mm
- Cutting depth = 30 mm
- 7 cuts
Sodick AP250L EDM
Нишков електрод / Дротовий електрод / Wire Electrode = ø 50 µm (мікрон/micron)
- Workpiece: DIN 1.2343 Tool Steel, 52HRC
- 5 x 5 mm
- Pitch 0.2 mm
- Cutting length = 60 mm
- Machining time = 2 hr 34 min
- 5 cuts
- Wire electrode ∅ = 0,05 mm (50 µm)
- Workpiece: DIN 1.2210 silver steel 60HRC
- t = 3 mm
- contour length = 57 mm
- machining time = 1 hr 58 min
- 3 cuts
- wire ∅ = 0,05 mm (50 µm)
- Workpiece: DIN 1.2210 silver steel 60HRC
- t = 1 mm
- contour length = 15 mm
- machining time = 45 min
- 7 cuts
- wire ∅ = 0,05 mm (50 µm)
- Ra=0.10 µm